BARADA G-Series DX Split Air Conditioner - 7 Ton 80000 BTU/Hr @T4

AC unit should be maintained on a periodic basis. That is, twice a year, once at the beginning of spring and once at the end of summer. This maintenance will ensure efficient operation and avoid sudden breakdowns throughout the year.

• Cleaning the air conditioning filters regularly ensures clean air flow.
• Check the integrity of the electrical wires
• Make sure the cooling unit is efficient and free of leaks.
• Check the fan and make sure it is working properly.
• Check the gas and add more if it is low.

• Better cooling efficiency
• It will reduce the rate of sudden breakdowns.
• Reduce the cost of maintenance and repair.
• Reduce electricity consumption.
• The air conditioner will last longer.
• You will enjoy cool and clean air.

• The drainpipe is blocked
• The air filter has not been cleaned for a while
• The amount of refrigerant is low
• It is not installed properly

- You must check the thermostat properly, especially if the temperature rises, it is likely not set to cooling mode, so you can turn off the air conditioner and then turn it back on to cooling mode. - Changing the air filter is very important; because a dirty filter prevents air flow and reduces its cooling. So, make sure to change and clean it regularly.

- There is a refrigerant leak, which makes it difficult to cool the air. Therefore, it is essential that the air conditioner is checked by a specialized technician.

 - Checking the cleanliness of the air filter and condenser unit of the air conditioner is important, and make sure to adjust the temperature settings if the heat pump does not work to cool the air.

 - Freezing of the evaporator coil prevents air flow easily, which leads to the air conditioner not cooling the air.

When your air conditioner's filter is clogged, the amount of cool air it can draw in is reduced, affecting your and your family's comfort level.

 Dirt, dust, and lint in the air filter also puts pressure on the blower, whose fans push air through the filter.

Dirt, dust, and lint also put pressure on the blower, because the blower fans are basically pumping air through the filter.